24 hour
On-Line shopping

Same Day Despatch

Next-Day delivery option
more info

We have a convenient & easy to fit remote control upgrade to suit Cardale Steel-Line & AutoGlide garage door operator that can be fitted within about 5 minutes with no technical knowledge, we even supply a screwdriver !

The Seip EKR1MCT/13A remote control receiver unit is fitted with a 13A mains plug & 7Mtrs of low voltage flex and simply plugs into a normal household mains socket and connects by two wires to the low voltage wall mounted pushbutton switch connections on your existing garage door operator system.

Wiring connections
If you have a Cardale Autoglide III operator you'll find a pale green two pin plug beside the black 3 pin mains input plug on the underside of the motor housing as shown below.
The wall mounted pushbutton switch (if fitted) should remain connected to the pale green plug in addition to the new Seip remote control receiver.

Click image to enlarge

Click image to enlarge

Seip EKR1MCT/13A
Mains powered radio control receiver with
13A mains plug, 7Mtr extended flex & screwdriver
receiver module dimensions 84mm x 26mm x 19mm
(illustrated with mini & midi keyfob options)

Cardale Autoglide Mk I & II

A pale green two pin plug for the pushbutton switch will be found inside the triangular wall mounted control box on an Autoglide Mk I or Mk II operator.

Note: It's essential that your AutoGlide operator functions normally from the wired-in pushbutton so please confirm that your door works properly from this before ordering a Seip remote control upgrade.  If a pushbutton switch has not been installed you can test your operator by locating the pale green two pin plug pushbutton terminals on your door operator unit (pale green two pin plug as illustrated left) and briefly shorting the terminals together, this should start the door moving.

From Germany's leading garage door operator manufacturer

Conforms to MPT 1340 specification

Note: the car must have Homelink system with software rev. 6 or later - to verify, refer to Homelink Instructions (page 7)

Would you like to add remote control to your:

Seip manufacture a receiver to enable items such as gates or garden pumps & lights etc. to be operated from spare buttons on your Seip keyfob transmitter, the receiver is housed in a weatherproof enclosure making it suitable for indoor or outdoor applications

Range aprox 75 to 100mtrs

Click Here for Further Details

Frequently Asked Questions

Q/ If my aging electric operator fails, can the new Seip keyfobs be used with a replacement operator ?
A/ Yes - Seip are Europe's leading garage door operator manufacturer and the keyfob transmitters supplied with our upgrade kits are compatible with the Seip TS series electric door operator range and if you decide to purchase a replacement Seip electric door operator from us within 12 months of buying a remote control upgrade we'll buy back the unwanted Seip receiver unit at the original purchase price less 50%.

Q/ Can I use the spare button(s) on Seip keyfobs to control other doors or items around the home ?
A/ Yes - Seip produce a range of receivers to enable gates, water pumps & lights etc. to be controlled by the spare keyfob buttons.

Q/  Will I still be able to use the original hand transmitters ?
A/ Yes - by attaching a new Seip receiver in addition to the original, both new and old transmitters can be used to control a door

Q/ What is the range from which I can control the door ?
A/ The Seip Midi keyfob has a range of 75 to100 Mtrs whilst the smaller Mini fob offers slightly less range