Remote control handset and key-fob transmitters for
electric garage door and gate operators by mail order

Secure On-Line Shopping - Same-Day despatch of most items

Items in Basket:  

Total Price:

View Basket

'live' up-to-minute
stock quantities
are shown in red

We have a convenient & easy to fit key-fob style
upgrade to suit your existing garage door operator

Seip EKR1MCG receiver upgrade (illustrated with mini & midi keyfob options)
receiver module dimensions 90mm x 30mm x 19.5mm
 

Our upgrade comprises of a 433Mhz remote control transmitter and a matching radio receiver module that simply replaces the original Stanley Multicode receiver to provide a quick & simple DIY upgrade. We even supply a screwdriver  !	Mini key-fob transmitter dimensions 41mm x 26mm x 10mm
From Germany's leading garage door operator manufacturer An ideal upgrade for older garage door operators for which replacement handsets are no longer available The illustration below shows a Stanley 3807 garage door operator but our Seip EKR1MCG receiver kit can be connected to all Stanley models with three screw terminals (for model ET380 click here) Before  . . . . . . . . . .  and After !
Click image to enlarge Stanley garage door operator shown with it's original Stanley receiver unit (brown box) Stanley systems were supplied on 40.685Mhz, 173.3Mhz and 300Mhz radio frequencies, our Seip upgrade receiver can be used regardless of the frequency of your original system. Note: if your Stanley receiver is the 173.3Mhz type it must be removed prior to installing the new Seip receiver unit (see F.A.Q.) The two core bell wire from the wall mounted pushbutton switch (if fitted) should remain connected as before (see white wires in the above images)	Click image to enlarge Stanley garage door operator fitted with new Seip 433Mhz upgrade receiver type EKR1MCG  (white module)  Ignore the wording on the label below the three terminals on the Stanley operator as it's wrong! The left terminal is the '24V' supply and the right terminal is 'COM' (common) as shown in the schematic diagram. Connect the new Seip receiver to the three terminals as follows:  black/blue wire to RH terminal blue wire to centre terminal red wire to left terminal
Note: It's essential that your electric operator functions normally from the wired-in pushbutton so please confirm that your door works properly from this before ordering a Seip remote control upgrade. If a pushbutton switch has not been installed you can test your operator by briefly linking the pushbutton terminals on your door operator unit together with a metal object, (center & right terminals as illustrated here) this should start the door moving. For wiring details and illustrations showing the Seip 24 volt receiver unit fitted to other garage door operators click here Note regarding Stanley model ET380 garage door operator Unlike most Stanley models, the ET380 has an internal radio control receiver with no provision for powering an alternative external 24 volt receiver so our Seip EKR1MCT 230 volt mains powered receiver kit will be required

Can be installed and working within about
5 minutes with no technical knowledge

Don't just take our word for it !  -   Read what our customers say !

Read More Reviews from Satisfied Customers
 

Frequently Asked Questions

Q/ If my aging electric operator fails, can the new Seip keyfobs be used with a replacement electric operator ?
A/ Yes - Seip are Europe's leading garage door operator manufacturer and the keyfob transmitters supplied with our upgrade kits are compatible with the Seip TS series electric door operator range and if you decide to purchase a replacement Seip electric door operator from us within 12 months of buying a remote control upgrade we'll buy back the unwanted Seip receiver unit at the original purchase price less 50%.

Q/ Can I use the spare button(s) on Seip keyfobs to control other doors or items around the home ?
A/ Yes - Seip produce a range of receivers to enable gates, water pumps & lights etc. to be controlled by spare buttons on the keyfob .

Q/ Will I still be able to use the original hand transmitters ?
A/ Stanley 173.3Mhz receivers (brown case) are known to interfere with the performance of the Seip EKR1MCG receiver resulting in very poor range so if you have a 173.3Mhz receiver unit this must be removed, if you have a Stanley 40.685Mhz receiver this may remain connected, and the new Seip receiver fitted beside it, this will allow both new and old transmitters to be used to control the door (please note :- you won't benefit from the improved security of the Seip rolling code technology unless the old receiver is disconnected)

Q/ What is the range from which I can control the door ?
A/ Seip keyfobs have a range of approx. 75 - 100 Mtrs

Same day despatch on orders submitted by 4pm
Next-day delivery also available*
(*on orders placed Mon to Thurs only)

choose 'next-day' delivery at the checkout

•  Delivery Options  •  Will a Signature be Required ?  •

•  Prices & On-Line Ordering  •  Fitting Instructions  •
•   Add or Read a Review of this Product   •
•  Seip Electric Operators  •   Door Security  •
•  Spares &  Accessories  •  Garage Door Indicator Alarm  •
•   Customers Feedback Comments   •
 •   Site Index   •   Home Page   •   Contact Us   •